Menu
Your Cart

R-CAS-V VINYLESTER SPIN-IN CAPSULES FOR THREADED RODS 20MM

R-CAS-V VINYLESTER SPIN-IN CAPSULES FOR THREADED RODS 20MM
R-CAS-V VINYLESTER SPIN-IN CAPSULES FOR THREADED RODS 20MM
R-CAS-V Vinylester capsule resin for concrete

Capsule for 20mm threaded rod

[Qty: 6/Box]

R-CAS-V VINYLESTER SPIN-IN CAPSULE

High-performance, quick-setting, styrene-free vinylester resin for concrete. Spin-in capsule for threaded rods where extreme strength is required.

QR for installation

Installation guide

       
  1. Drill hole to the required diameter and depth for socket size being used.
  2. Clean the hole with brush and hand pump at least four times each. It is very important and necessary before installation.
  3. Insert capsule into the hole. Connect stud to drilling machine using appropriate driver system.
  4. Position the stud into the glass capsule then switch on the drilling machine and drive stud into the capsule. Switch off the drilling machine as soon as the bottom of hole is reached.
  5. Leave the anchor undisturbed unitl the curing time elapses.
  6. Attach fixture and tighten the nut to the required torque.

Features and Benefits:

  • Approved for use with threaded rods in non-cracked concrete (ETAG001 Option 7)
  • High performance for use safety critical application - heavy-duty fastenings with small spacing and edge distances
  • The system relies on the adhesion between the concrete and resin, which is free from expansion forces. This makes it an ideal choice where close edge and spacing distances are required
  • Capsule contains precise amounts of ingredients making it a very consistent product
  • Suitable for making fixings underwater. Adhesive strength is not affected by unpolluted water
  • Suitable for dry or wet non-cracked concrete
  • Styrene free - odourless

Applications

  • Threaded rods
  • Balustrading
  • Railings
  • Heavy machinery
  • Structural steel
  • Steel columns
  • Cladding restraints
  • Curtain walling
  • Fencing & gates manufacturing and installation
  • Formwork support systems
  • Garage doors
  • Guard rails

Base materials

Approved use in:

  • Non-cracked concrete C20/25-C50/60
  • Natural Stone

R-STUDS

Size M8 M10 M12 M16 M20 M24 M30
Thread diameter d [mm] 8 10 12 16 20 24 30
Hole diameter in substrate d0 [mm] 10 12 14 18 24 28 35
Installation torque Tinst [Nm] 10 20 40 80 120 180 300
Min. hole depth in substrate h0 [mm] hef + 5 hef + 5 hef + 5 hef + 5 hef + 5 hef + 5 hef + 5
Installation depth hnom [mm] 80 90 110 125 170 210 270
Min. substrate thickness hmin [mm] 120 130 140 180 230 270 340
Min. spacing smin [mm] 0.5 * hef 40 0.5 * hef 40 0.5 * hef 40 0.5 * hef 40 0.5 * hef 40 0.5 * hef 40 0.5 * hef 40
Min. edge distance cmin [mm] 0.5 * hef 40 0.5 * hef 40 0.5 * hef 40 0.5 * hef 40 0.5 * hef 40 0.5 * hef 40 0.5 * hef 40

Minimum working and curing time

Resin temperature Concrete temperature Curing time* Working time
[°C] [°C] [min] [min]
5 -5 480 -
5 0 240 -
5 5 150 -
10 10 120 -
15 15 90 -
20 20 45 -
25 30 20 -
25 40 10 -
Rawlplug's The nylon hammer fixing

Write a review

Note: HTML is not translated!
Bad Good
Captcha
R 80.50
Ex Tax: R 70.00
  • Stock: In Stock
  • Model: RAW R-CAS-V-20
  • Weight: 0.76kg
  • Dimensions: 280.00mm x 246.00mm x 246.00mm
We use cookies and other similar technologies to improve your browsing experience and the functionality of our site. Privacy Policy.