Menu
Your Cart

POLYESTER STYRENE FREE RESIN CHEMICAL ANCHOR 175ML

POLYESTER STYRENE FREE RESIN CHEMICAL ANCHOR 175ML
POLYESTER STYRENE FREE RESIN CHEMICAL ANCHOR 175ML
R-KEM II Styrene free polyester resin.

POLYESTER STYRENE FREE RESIN CHEMICAL ANCHOR

 

High quality bonded anchor. Styrene free polyester resin, suitable for use in non-cracked concrete and wide range of solid or hollow masonry structures. Approved for 15 substrates

Scan the QR code for installation  POLYESTER STYRENE FREE RESIN CHEMICAL ANCHOR

[175 ml]

Installation guide

  1. Drill hole to the required diameter and depth for stud size being used.
  2. Solid substrates: clean the hole with brush and hand pump at least four times each. It is very important and necessary before installation. Hollow substrates: insert mesh sleeve into the hole.
  3. Insert cartridge into gun and attach nozzle.
  4. Dispense to waste until even colour is obtained.
  5. Insert the mixing nozzle to the far end of the hole and inject resin, slowly withdrawing the nozzle as the hole is filled to 2/3 of its depth.
  6. Immediately insert the stud, slowly and with slight twisting motion. Remove any excess resin around the hole before it sets and leave it undisturbed until the curing time elapses.
  7. Attach fixture and tighten the nut to the required torque.

Features:

  • Easy to use - patented self-opening foil system
  • Ideal for indoor use - styrene free, odourless
  • Wide range of applications in the medium load range
  • Ideal for applications where conventional expansion anchors are not appropriate
  • Easy pumping thanks to patented self opening system and manual or pneumatic dispensers
  • Can be used with standard silicone dispenser
  • Suitable for repetitive use. Partly used product can be reused fitting a new mixing nozzle

Applications

  • Staircases
  • Gates
  • High racks
  • Canopies
  • Sanitary appliances
  • Steel constructions
  • Window elements
  • Railings
  • Handrails
  • Consoles
  • Ladders
  • Cable trays

Base materials

Approved use in:

  • Non-cracked concrete C20/25-C50/60
  • Solid Concrete Block
  • Hollow-core Slab
  • Solid Brick
  • Solid Sand-lime Brick
  • Hollow Sand-lime Brick
  • Hollow Brick
  • Vertically-perforated clay block
  • Hollow Lightweight Concrete Block
  • Also suitable for use in:
    • Natural Stone
Rawlplug's R-KEM II Styrene Free Polyster Resin Installation

 

Rawlplug's R-KEM II Styrene Free Polyster Resin Installation

Write a review

Note: HTML is not translated!
Bad Good
Captcha
R 180.55
Ex Tax: R 157.00
  • Stock: Out Of Stock
  • Model: RAW R-KEM-II-175
  • Weight: 0.32kg
  • Dimensions: 60.00mm x 52.00mm x 156.00mm
We use cookies and other similar technologies to improve your browsing experience and the functionality of our site. Privacy Policy.