-1080x468.png "Reliable Bolt"){kind=logo}
Brand: TORK CRAFT
Model: TCMT001-2-3-3
Flexible shaft for TCMT001 rotary tool
Collet diameter: Ø1.6mm
Application:
The collet is measured on the inside. There are three different collet sizes
available. The collet size needs to correspond to the shaft diameter of the mini
tool being used.
A drill chuck (TCMT001DC) can also be u..
R 30.30
Ex Tax:R 26.35
Brand: TORK CRAFT
Model: TCMT001-2-3-2
Flexible shaft for TCMT001 rotary tool
Collet diameter: Ø2.3mm
Application:
The collet is measured on the inside. There are three different collet sizes
available. The collet size needs to correspond to the shaft diameter of the mini
tool being used.
A drill chuck (TCMT001DC) can also be u..
R 30.30
Ex Tax:R 26.35
Brand: TORK CRAFT
Model: TCMT001-2-3-1
Flexible shaft for TCMT001 rotary tool
Collet diameter: Ø3.2mm
Application:
The collet is measured on the inside. There are three different collet sizes
available. The collet size needs to correspond to the shaft diameter of the mini
tool being used.
A drill chuck (TCMT001DC) can also be u..
R 30.30
Ex Tax:R 26.35
Brand: PG
Model: M8020
Collet set for thread 9/32 x 40
The collet set is used to hold the corresponding shank diameter.
Collets included in the set:
Ø 0.80mm
Ø 2.35mm
Ø 3.00mm
Ø 3.20mm
Collet nut included for 9/32 x 40 thread..
R 186.42
Ex Tax:R 162.10
Brand: PG
Model: M8010
Collet set for thread 8 x 0.75
The collet set is used to hold the corresponding shank diameter.
Collets included in the set:
Ø 1.00mm
Ø 1.50mm
Ø 2.35mm
Ø 3.00mm
Ø 3.20mm
Collet nut included for 8 x 0.75 thread..
R 217.98
Ex Tax:R 189.55
Brand: TORK CRAFT
Model: TCMT001DC
Chuck for TCMT001 rotary tool
Application:
The chuck is used to replace the collet clamping system of the TCMT001 rotary
tool. The clamping range is Ø0.3-3.2mm.
TCMT001 accessories:
TCMT001DC
Drill chuck 0-3.2mm
TCMT001FS
Flexible shaft
..
R 122.99
Ex Tax:R 106.95
Brand: PG
Model: M8560
Keyless chuck for thread 9/32 x 40
The keyless chuck is used to hold accessories with a shank diameter between Ø 0.4-3.2mm...
R 406.87
Ex Tax:R 353.80
Brand: PG
Model: M8550
Keyless chuck for thread 8 x 0.75
The keyless chuck is used to hold accessories with a shank diameter between Ø 0.4-3.2mm...
R 391.00
Ex Tax:R 340.00
Brand: PG
Model: M8100
Screw type mandrel
The mandrel can be used with rotary mini accessories designed for cutting/sawing, grinding and polishing applications.
Tighten/loosen the supplied screw to change accessories.
Fit the accessory between the supplied reinforced phenolic resin flanges and make sure tha..
R 56.81
Ex Tax:R 49.40
Brand: TORK CRAFT
Model: TC08395
Collet wrench
The collet wrench is used to securely tighten the collet nut or multi chuck, locking the mini rotary accessory in place.
The back end of the wrench has a flat tip screwdriver that can be used to change accessories on the mini rotary mandrels...
R 10.06
Ex Tax:R 8.75
Brand: TORK CRAFT
Model: TC08394
Multi chuck - Ø 0.8mm - 3.2mm
The multi chuck is ideal for mini and micro drill bits, to secure hold different diameter accessories from Ø 0.8mm up to Ø 3.2mm..
R 82.57
Ex Tax:R 71.80
Brand: TORK CRAFT
Model: TC08353
Pyramidal mandrel
The mandrel can be used with hard felt polishing accessories.
Simply tighten the pyramidal shaped screw in the hard felt accessory's predrilled centre hole.
QTY: 1..
R 10.06
Ex Tax:R 8.75